Launching 16/02/23

Flimmuur Tactical is proud to present an exclusive collaboration with Platatac: ASAD Dump Pouch made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

The ASAD Dump Pouch Modular is a highly versatile sub load dump pouch designed to be fastened via a Velcro panel to the lower edge of any plate carrier or chest rig that uses a hook and loop sandwich system. When rolled up using the velcro pull tab, it will sit neatly and take up minimal room underneath your under magazine pouches. 

The pull-tab release system allows for quick deployment of the pouch with only one movement when required. When deployed, the hard plastic stiffener in the front of the pouch allows the mouth to ‘pop’ open providing a structured opening for easy insertion and access to items. The routed elastic shock cord allows the user to quickly cinch close the top of the pouch and the tail can be held out of the way via an internal loop tab.

The ASAD Dump Pouch will hold a large amount of spent magazines and the two vertical pleats sewn into the front panel allow expansion to accommodate bulky or odd shaped items like a gas mask, water bottles or dems gear.

Internally, there is a 2 rows x 4 columns PALS area to attach any Molle compatible pouches, such as 40mm or distraction pouches for rapid access to extra items. The ASAD dump pouch also will accept a soft armour insert in the zippered internal pocket. 

Features

• Can hold up to 12 AR/M4 style magazines stacked side by side
• Hook and loop sandwich mounting to work with various Platatac and other OEM platforms 
• Pull-tab quick release system secures with hook & loop
• Shock cord with barrel lock to cinch the pouch closed
• Gusseted front panel to allow expansion for extra room
• Accepts soft armour in inside zippered pouch or can be used as an admin pouch or to store Cyalume in the elastic loops
• Mesh areas in bottom corners to allow dirt and water to drain out for Amphib or Jungle Ops.
• 2 rows, 4 columns of PALS internally to attach extra pouches, 40mm, Distraction or Mag pouches.

Dimensions, Weight and Fabrics 

• 500 Denier Cordura Nylon
• Velcro Attachment Area: 205mm x 95mm
• Dimensions Open: 260mm H x 240mm W x 110-160mm D 
• Weight: 160 grams

Launching 16/02/23

Flimmuur Tactical is proud to present an exclusive collaboration with Platatac: ASAD SLABB made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

The All Singing All Dancing Sub Load and Bum Bag (ASAD SLABB)  is an adaptable, body-conforming pouch designed to supplement your fighting load. Its multiple mounting options make the ASAD SLABB a versatile addition to not just soldiers, but also Law Enforcement officers, outdoor enthusiasts, and anyone requiring a flexible carriage option.

As part of the versatile ASAD Velcro-In accessories range, the SLABB has a velcro sandwich to mount to a  plate carrier/chest rig mounted pouch. It can be mounted either under the front flap and cummerbund or inserted into the plate pocket on most plate carriers. The SLABB also has a removable waist/shoulder strap, allowing it to double as a bum bag. The velcro sandwich can be tucked into a pocket in the rear when not required. This versatility allows the SLABB to be loaded once and used for whatever the mission requirements are.

A front gusseted pocket made from Tweave 4-way stretch is ideal for a range of quick-access items. The pocket also has a 75mm x 40mm colour-matched Velcro loop field for affixing IFF etc. A zippered pocket at the rear against the body is ideal for securely carrying phones, passports, notebooks and other flat items.

The main zippered storage compartment features paracord tie-off points and full-length mesh divider perfect for organisation. A velcro loop field against the back of the compartment is ideal for attaching PLATATAC’s ASAD Velcro-in Inserts, to increase internal organisation. 

Webbing loops sewn to the lid of the ASAD SLABB can be used to route bungee or hold an elastic loop strip that will take a tourniquet, door charge or similar sized item.

Features

• Multiple mounting options allow the SLABB to be used in multiple configurations
• Velcro sandwich to attach to plate carriers etc.
• removable strap to convert to a bum bag
• Large main compartment to stow additional gear
• Velcro loop field in the main pockets to attach velcro in inserts
• gusseted front pocket for bulky items 
• Colour-matched loop field for attachment of flags or IFFs 
• Web tape loops
• YKK Zips with heat-shrunk paracord pulls

Weight & Dimensions

• Weight: 190g
• Dimensions: 250(w) x 150(h) x 100(d) mm

Materials

• Outer Fabric: 500d Cordura
• Lining: 70D Ripstop Nylon
• Webbing: Mil-W-17337
• Hook and Loop: Mil-Spec AA-A 55126
• Omega Mesh
• YKK Zips

Launching 16/02/23

Flimmuur Tactical is proud to present an exclusive collaboration with Platatac: Aviator Bag made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

Made out of 500 denier nylon and lined with polyester 3D air mesh which offers a layer of padding against damage to your gear. These spacious bags ensure your equipment stays protected. Dual carry handles and an adjustable shoulder strap mean you can have your hands free to carry extra gear to your aircraft.

The three external pockets can easily store all the equipment you may require while in flight, including NVG's, spare batteries, documentation/publications/maps, cold weather gear and more. Dual zippers on each pocket for convenience, plus clips to compress the bag further for secure storage while not in use.

Features

• The main compartment has 3D air mesh padded lining to protect your flying helmet or sensitive equipment when transiting to your aircraft.
• Two medium-sized pockets for flight gloves, NVGs or other small items
• One large long pocket with velcro dividers for whatever you may require - organise how you choose
• 10cm x 53cm Velcro Loop field to attach nametapes, Flags, IFF or other patches
• All compartments have YKK #10 zips with paracord zip pulls

Dimensions

Main Compartment
55cm W x 51cm H x 4cm D

Top Pocket
53cm W x 20cm H x 7.5cm D

Small Pockets
25cm W x 25cm H x 7.5cm D

Flimmuur Tactical is proud to present an exclusive collaboration with Platatac: Bullock Echo Pack MK3 made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

FEATURES

• Padded shoulder straps with quick detach option
• Padded back for added comfort and protection of contents
• 6 x 4 MOLLE field on the main compartment for attachment of extra pouches
• Fixed adjustable cargo carrier to hold ballistic helmet, cold/wet weather jacket or additional gear
• External zippered pocket on the front of cargo carrier
• Internal bladder sleeve that holds up to a 3ltr bladder i.e. Platatac Insertion bladder (Include link)
• 2 x Internal mesh cargo pockets on front
• Removable internal zippered mesh pocket for small items
• 2 x side pockets for storing smaller additional items.
• 150x75mm loop field for IFF, ANFs or nametape
• 4 x 3 MOLLE field on cargo cradle for extra pouches
• 1” web tape handle for carriage or hanging in vehicles
• 2 x hydration tube/radio antenna routing ports
• Drainage eyelets on main compartment, side pockets and front pocket
• Double stitched and bar tacked on all major seams
• Made from 500 denier nylon
  
  

Flimmuur Tactical is proud to present an exclusive collaboration with TRC Outdoors: Cierzo Windproof Shirts made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

The Cierzo Shirt is an ultra-lightweight, windproof layer; inspired by garments originally made by Special Forces Soldiers out of discarded parachutes. It utilises modern technical fabrics to create a breathable yet windproof garment that can be used as a windproof outer layer or a lightweight intermediate layer. It is generously sized to enable the user to wear it over kit, whilst packing down very compactly and fits inside a supplied drawstring stuff sack.

Also available as part of a Windproof Suit.

Features

• 30D Uncoated Ripstop Polyester
• 5 thread overlock on all seams for strength
• Bonnadex Elastication at waist and cuffs
• Raglan sleeves for freedom of movement
• Stuff sack for storage

• One size fits most, up to 50” chest
• Available in both standard and long (>6 Feet or >180cm in height) sizes

Flimmuur Tactical is proud to present an exclusive collaboration with TRC Outdoors: Cierzo Windproof Suits made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

The Cierzo Suit consists of the Cierzo Windproof Shirt (available separately here) and Trousers. Both items are highly breathable yet windproof garments that can be used as a windproof outer layer or a lightweight intermediate layer. The suits are ideal for Wet & Dry Drills in the Jungle.

Both the Shirt and Trousers (waist size range of 24″- 48″ / 60cm – 121cm) are generously sized and elasticated to allow the user to wear it over kit. Each are supplied with individual drawstring stuff sacks; dry bags are available separately here. 

Features

• 30D Uncoated Ripstop Polyester
• 5 thread overlock on all seams for strength
• Bonnadex Elastication at waist and cuffs
• Raglan sleeves for freedom of movement
• Stuff sack for storage

Sizing

• One size fits most, up to 50” chest
• Available in both standard and long (>6 Feet or >180cm in height) sizes

Flimmuur Tactical is proud to present an exclusive collaboration with Platatac: Cool Under Tactical Shirts V4 (CUTS V4) made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

The CUTS V4 is a full-featured design with a modern tailored fit with an emphasis on versatility and functionality, and is made with durable, but comfortable 50/50 Nylon Cotton Rip-Stop material in the sleeves and Polartec Power Dry in the body.

The stretch material in the torso is specifically designed to promote cooling and moisture management when wearing body armour in warm environments or whilst conducting strenuous activities.

The CUTS V4 is suitable for long-duration operations in all-round conditions and will keep you mission-ready and in the fight.

Matching Jungle Kurtz field shirts, Willard trousers and Tac Dax V4 combat trousers are also available.

 Free UK Postage

 Free International Postage (minimum purchase of shirt + Tax Dax trousers); I will manually refund the amount once the order is confirmed.

Features

• Made with an accurate reproduction of a classic Tigerstripe pattern
• Polartec Power Dry next-to-skin fabric for superior comfort, breathability & moisture management
• Two upper-arm zip and top access pockets allow for convenient access when wearing LCE or body armour
• Longer hem to tuck into trousers
• Zippered 3/4 length collar can be worn open or as neck protection
• Internal elbow pockets for various OEM removable elbow protection systems
• Velcro loop fields on sleeve pockets for ID & IFF patches
• Pen sleeve in bicep pocket zip placard and eye protection stowage loop in the top flap
• Velcro adjustable wide cuffs can be rolled up for ventilation

Materials

• 50/50 NYCO (Nylon Cotton Mix) Rip-Stop
• 100% Polyester 180 g/m2 Polartec Power Dry fabric

Ad-hoc psyops campaigns were conducted by American troops in Vietnam, who left Death Cards near the enemy dead. The Ace of Spades was a recurring motif, since it was assumed that the Vietnamese held superstitious beliefs and regarded it as a bad omen.

Our good friend and talented artist, Marc Lee, produced a piece of artwork to pay tribute to the Long Range Reconnaissance Patrol (LRRP).  Flimmuur Tactical is releasing a set of stickers, patches and prints to complement the Tigerstripe series of equipment.

 The A4 print is produced using the same laminated linen cardstock as the smaller playing cards; they are also printed double sided. 

• FREE UK POSTAGE; £2 for Worldwide

   

Ad-hoc psyops campaigns were conducted by American troops in Vietnam, who left Death Cards near the enemy dead. The Ace of Spades was a recurring motif, since it was assumed that the Vietnamese held superstitious beliefs and regarded it as a bad omen.

Our good friend and talented artist, Marc Lee, produced a piece of artwork to pay tribute to the Long Range Reconnaissance Patrol (LRRP).  Flimmuur Tactical is releasing a set of stickers, patches and prints to complement the Tigerstripe series of equipment.

The Morale Pack consists of:

• 1x Death Card Playing Card: printed by a UK-based playing card company onto textured and laminated linen cardstock.
• 1x Death Card Sticker: weather resistant and laminated vinyl sticker
  
• 1x Special Projects Sticker: weather resistant and laminated vinyl sticker, inspired by the sewn tags of South Vietnamese Tailors

• FREE UK POSTAGE; £2 for Worldwide

   

10% Pre-order discount (active until 04/04/2025; automatically applied on checkout)

Designed to enable the mounting of DJI Goggles 2 onto Wilcox G24 Mounts for seamless hands-free operation

Optional Metal Split Ring for dummy cord

Tested with specialist military/police teams 

Professionally 3D printed using highly robust SLS Nylon

Helmet and Goggles not included.

Note: Goggles 3 would required permanent modification for use with this mount.

Launching 16/02/23

Flimmuur Tactical is proud to present items from our joint range with British Tactical made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact. 

Custom Tigerstripe cordura laminate, exclusive to Flimmuur.

• Now with our new laser cut laminate back attachment system. 2 High pouches can attach by PALS or direct to belts up to 50mm wide.
• This is our new Elastic 4 Cyalume Small Utility Pouch
  
• Front of pouch has 2 rows of elastic to hold up to 4 Cyalumes.
• 60mm deep with half opening zipper.
• Large durable Milspec two way zip with non locking sliders.
• Paracord attached to sliders for easy opening and silent sliders.
• Plain inside with laminate tab with 2 holes for dummy cord each side.
• Made with 1000D Cyre Precision Multicam Cordura
• Reinforced stitching and bound seams using Nylon Bonded rot and mildew resistant thread.
• New updated laser cut Molle attachment system. Molle grid produced from 500D to 500D laminate with straps produced in 1000D to 500D laminate. Tried and tested, proven to be a lot easier to weave than conventional press stud systems.
• Superb build quality with laser cut fabric (heat sealed) and precision automated sewing.  
• Proudly made in the UK.
• Lifetime Defect Warranty.

 Pouch Weight

• 110 grams
  

Dimensions

• Width - 16cm
• Height - 11cm
• Depth - 6cm
• Volume - 1ltrs

MOLLE Attachment/Coverage:

• Attaches to 4 wide by 2 high.
• Covers 4 wide by 2 high.

Launching 16/02/23

Flimmuur Tactical is proud to present an exclusive collaboration with Platatac: FTE Claymore Bag made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

Looks can be deceiving and in this case, the Advanced FTE appears to be less than it is. However, with internal components including internal organisation loops and a Velcro lined wall, this bag is anything but simple. Inside of the zippered pocket, the Velcro loop lined wall enables the mounting of Velcro hook-backed pouches, holsters or Blue Force Gear Dappers allowing safe carriage of your sidearm and CES.

The internal organisation pockets and loops can fit your medical supplies and radio, making the Advanced FTE a very capable and discreet ‘go bag’.

Features

• Based on the original FTE bag
• External 150mm x 500mm Velcro loop field for patches and IFF
• Push button with Velcro on the front lid
• Internal elasticized loops and pockets for organisation of kit
• Hidden internal zippered pocket (fits iPad) with Velcro loop wall for mounting of Hook backed pouches and Blue Force Gear Dappers
• Adjustable shoulder strap
• Available in Multicam™, CBK and Black
• Built from 500 denier Cordura™ brand tactical nylon with MILSPEC fittings and webbing

Flimmuur Tactical is proud to present an exclusive collaboration with Platatac:  Tac Dax V4 made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

LIMITED SUPPLY (MORE TO FOLLOW).  FREE POSTAGE WITHIN UK; SHIPPING WORLDWIDE

Made from tactical 50-50 Nyco Ripstop, the Jaywick shorts feature a reinforced seat, a range of pockets, and the same dynamic movement and comfort our TAC DAX are famous for.

The Jaywick shorts are suitable for long-duration operations in all-round conditions and will keep you mission-ready and in the fight.

Features

• Dedicated knife pocket in hand pockets
• Zippered fly with Canadian button closure
• Rear pockets with Velcro closure
• Large thigh pockets with Canadian Button closure
• Open top pockets behind large pockets
• Dual-layer seat to reduce wear

Shorts fit True to Size

Flimmuur Tactical is proud to present an exclusive collaboration with Platatac:  Tac Dax V4 made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

Designed to be close-fitting, yet a comfortable garment, with a long tail for easy tuck into pants. A full Zip and bar button front closure for redundancy, allowing you to use just the buttons, thereby maximising airflow. Mesh in the pockets to drain water and ventilation points in strategic areas, provide maximum comfort and performance.

Matching CUTS V4 combat shirts, Willard trousers and Tac Dax V4 combat trousers are also available.

Free UK Postage

Features

• Made with an accurate reproduction of a classic Tigerstripe pattern
• Two large angled top opening chest pockets with a mesh bottom and ITW slotted bar button and Velcro closure
• Two upper-arm zip and top access pockets allow for convenient access when wearing LCE or body armour
• Pen sleeve in bicep pocket zip placard and eye protection stowage loop in the top flap
• Bellowed compass pocket on the front placard will hold most in-service Silva prismatic compasses
• Velcro loop fields on sleeve pockets for ID & IFF patches
• Paracord lanyard points in all pockets to secure small items
• Underarm and upper back mesh vents keep airflow to a maximum when active or static
• Three-piece fold down collar with an extension for added sun protection
• YKK zip and bar button closure behind the front placard
• Three-button adjustable wrist cuff

Routing the elastic leg strap through the bog-standard holster can result in the occlusion of the femoral artery and discomfort, especially for those who are well-endowed.

The Leg Strap Adapter Plate is a simple design, lasercut from strong, yet flexible, thermoplastic composite sheet.  Simply sandwich the plate in-between the mid-ride mount.

Currently available in Safariland and Radar (British Issue Glock Holster) compatible mounting patterns.

Please read the sizing information carefully and note that a black G-hook inner belt is included.

Flimmuur Tactical is proud to present items from our joint range with British Tactical made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact. 

Custom Tigerstripe cordura laminate, exclusive to Flimmuur.

Standard Multicam version available at British Tactical: https://www.britishtactical.com/hl-lw-shooters-belt/

• Introducing the worlds lightest and lowest profile articulated MICRO PALS Shooters belt.
• Produced using thermoplastic for outstanding strength to weight ratio, durability and stiffness.
• Articulated to provide an unparalleled fit. Thermoplastics, whilst rigid, are inflexible and will not conform to the users body shape over time; our anatomically shaped belts will allow for a more comfortable and stable fit from day 1.
• Unique friction lock buckle attachment design, allowing the user to change the type of buckle used with zero sewing required.
• Ability to thread either a 25mm/1 inch belt through the top and base layer to also act as a MICRO PALS belt sleeve for use with PARA type webbing and COBRA buckle with D-Ring.
• The belt has three laser cut laminate PALS grid sections (2 equal front parts and the back section) which allows attachment of Molle backed or belt specific pouches and holsters. The front hip sections also have vertical slits to allow horizontal mounting of pouches.
• The underside is covered in our signature UNI Hook/loop tape allowing our belts to be used with both hook or loop inner belts and compatible with our existing Belt Pad.
• Supplied as standard with a 3DSR® Tactical Buckle, option to upgrade to other buckles available.
• SIZING; Shown as front left (hip), back, front right (hip). EXAMPLE 6/6/6 will be 6 PALS Front left, 6 PALS Back, 6 PALS Front right. 18 PALS in total.

How to measure for belt size:

Whilst wearing the trousers AND trouser/inner belt that you plan to wear below the belt, thread a tape measure through your belt loops at the level at which you intend to wear the belt at, measuring all the way round. Note: trouser waist sizes are often very inaccurate and not suitable.

Using this figure to select the correct belt size from the chart below;

1.  Sizes shown are for trouser equivalent and may differ. Follow size fitting guide
2.  Weight of sleeve excluding buckle, webbing and inner belt.

Inner belt options:

G-Hook Inner Belt - Double layer of MOD Spec webbing with Mulitcam Loop sewn on top. Adjustable metal G-Hook attached to small loop other end.

 3DSR® Tactical Buckle:

• Easy release even while under load
• 136kg (300lb) load capacity
• Shaped to fit in palm for a consistent squeeze release
• If overloaded will release before breaking
• Fragmentation resistant / solid chance of still functioning if shot / damaged
• Mud and crush resistant due to flexing shape design
• Maintains physical properties to -40° (Celsius)
• Combat Proven, Fragmentation resistant Polymer
• Near-Infrared Reflection Properties

• Part of our brand new magazine pouch range using our latest Patent Pending Thermo-Plastic Magazine Pouch Inserts.
• Lighter weight, lower profile and adjustable retention. 
• Our new MagPI range of pouches are up to 50% lighter than traditional kydex wedge pouches. 
• Insert design extends longevity of the Velcro adhesive especially vital in hot environments.
• This listing is for our Short Single 5.56 pouch, designed to securely hold one 5.56 magazine.
• MagPI provides secure magazine retention without the use of top bungee.
• Option to add bungee top retention for added piece of mind. Purchased separately.
• Easy to re-insert magazine into pouch one handed and held securely.
• Back attachment system allows pouch attachment to Molle/PALS and direct to belts.
• Pouch constructed from Laser cut 500/1000D Brookwoods Laminate Cordura.
• Tried and trusted back attachment system, constructed from laminate materials with updated thermoplastic tab.
• Superb build quality with laser cut fabric (heat sealed), precision automated sewing.
• Proudly made in the UK.
• Lifetime Defect Warranty.
• Contents not included, for demonstration only.
• Listing is for a single pouch with Magazine pouch insert

Pouch Weight: 

• Single Short 5.56 with insert: 37 grams

Pouch Dimensions:

• Single: 8.1cm wide x 9.4cm tall x 3.5cm deep

Molle/PALS coverage

• Single: Attaches by 2 columns by 2 rows

Launching 16/02/23

Flimmuur Tactical is proud to present an exclusive collaboration with Platatac: Peacekeeper Mk5 made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

The Peacekeeper MK5 (PK5) is the latest iteration in the Platatac family of of Chicom-compatible fixed rigs. Like its predecessor, it boasts a large carrying capacity, with three double velcro closure magazine pouches central to the rig designed primarily to hold 2 x M4 magazines each. The magazine pouches have adjustable/removable lids to allow larger magazines, such as AK47 mags to be carried or allow easier access to mags by removing the flaps all together. They can also accommodate a pistol, black means (Baofeng) radio or a smoke grenade if required. Bungee retention around the mag pouches provides additional security for stowed items. 

A PALS field either side of the mag pouches allows the user to attach additional magazine, grenade, radio, or first aid pouches. Below the magazine pouches is a long zippered pouch for other mission essentials, such as additional first aid items or dems gear. Sewn to the bottom of this pouch are webbing loops to attach either of two elastic inserts (included), one holds SOF or CAT TQ and the other can hold two 4" or 6" cyalume, having either one readily accessible when required. 

At the extreme ends of the PK5 are two medium zippered accessory pouches with additional clip closure. These pouches will hold a water bottle such as the Platatac 1 Litre flask or a 1 Litre Nalgene, or utilising the internal open-top mesh pouch with bungee retention, a single ANPRC 152 radio can be carried when utilizing the 19mm clip to close the pouch. A small zippered pocket on the front of each pouch is perfect for smaller items like cam kits, gloves etc. 2 x Rows x 2 Columns of external PALS on either side of each pouch allow you to attach smaller MOLLE compatible pouches such as grenade pouches. 

Against the body centrally is an velcro closure mesh pocket. A long zip can be inserted into this pouch to make it zippered admin pocket. Either side of this is a Tweave 4 way stretch pocket that can be used to hold additional mags, radio, a map, notebook, GRG or marker panel.

The Velcro sandwich area between the back mesh and under the pouches has been enlarged, to allow better integration of our ASAD range of velcro in sub load pouches. 

Included with the PK5 are two harness options, the standard Chicom low pro adjustable shoulder straps and the Chicom LW H-Harness, which provides a lightweight general-purpose alternative to the low pro straps. Both are flat-sewn, and designed to remain as flat as possible for use with packs and other harness systems. A range of other harness options is available to boost carrying capacity.

Features

• Can carry up to six 30 Round AR/M4 style magazines (Each pouch will also accommodate 2 x AK mags, or a single 20rnd. 417/.308 mag)
• 2 x Accessories/Water bottle/GP/ANPRC 152 pouches with front zip admin pockets  
• 1 x Large Velcro mesh pocket with included Velcro in zip
• 2 x Tweave 4 way stretch pockets at the flanks
• 1 x Horizontal zippered pocket with webbing loops to attach elastic loop inserts to carry a TQ, Plasti Cuffs or Cyalume 
• PALS areas between pouches and on the sides of the GP pouches to attach additional MOLLE-compatible pouches
• Velcro sandwich for sub load pouches to boost carrying capacity
• Colour matched velcro loop for IFF, C/S or Flag patch with embroidered Platatac logo
• Sewn drainage holes in all pouches

Materials and weight

• 500 Denier Cordura nylon 
• Tweave 520E 4 way Stretch 
• ITW Nexus hardware 
• YKK Zips with heat shrink paracord pulls

Our take on the humble neck sock.    

Elastic and breathable mesh fabric for maximal comfort and protection from the elements.

Fully overlocked and folded edges for durability.

Fully reversible with a custom double sided camouflage print in the following combinations:

• Multi x Multi Black
• Multi x Multi Arctic
• Multi Jungle x Multi Black

Photo credit: Evo's Media

Now available for both left and right handed Safariland ALS holsters (shown attached on a RH 6354DO)

Engineered for a precision fit and snap right on.  No need for screws or tools.

SLS printed from highly robust Nylon.  Non-corrosive and perfect for Maritime environments.

Oversized in all the right places with a texturised finished, as well as in-built ridges, to enhance grip and that all-important draw. 

Currently available in black and custom Tan 499.

Tested on the following Safariland Holster Models:
6354DO
6390 RDS/RDSO

Note: the listing is for 1x ALS Lever Extender and the holster is not included.

Flimmuur Tactical Safariland Holster Belt Mount

Rigid material offers a stable mounting platform for any holster utilising the Safariland hole pattern.  Fully compatible with the issue Safariland 6354DO.

Offers +/- 10 degrees cant.

Weight: 47g (belt mount, leg strap adapter and screws INCLUDED; under a third of the weight of other solutions on the market).

Innovative belt mount and asymmetrical spacer element allows for a snug fit for both 45mm and 50mm belts.  The mount will not slide about unlike other solutions on the market.

Utilising bespoke materials for maritime conditions; both the thermoplastic and stainless steel bolts are resistant to corrosion, unlike aluminium, etc.

Contents:

1x Holster Plate

1x Asymmetrical Spacer (see video for explanation: https://www.instagram.com/p/Cm1vBSoLgOk/)

1x Belt Mount (lined with velcro hook and loop)

1x Leg Strap Adapter Plate

2x Short Stainless Steel Bolts

2x Long Stainless Steel Bolts

NOTE: The full sized Safariland leg strap adapter plate will be provided (refer to photos included in the listing).

Now available for both Left and right hanfed Safariland Level 3 ALS/SLS holsters (shown attached on a 6360 RH)

They are engineered for a precision fit and snap right on. The lever is carefully curved to fit around the tight hood.  

SLS printed from Nylon and are very robust. For additional grip, the extender has a texturised finished, as well as in-built ridges. 

Currently available in black.  Custom Tan499 dyed components will be available in the future.

Tested on the following Safariland Holster Models:
6360
6377

Note: the listing is for 1x ALS/SLS Lever Extender and the holster is not included.

Launching 16/02/23

Flimmuur Tactical is proud to present an exclusive collaboration with Platatac: SPUR Tropical Pack made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

From its humble beginnings as part of the SPUR pack range the SPUR tropical quickly became the pack of choice for our military personnel and an NSN'd pack for overseas deployments.

Now back and better than ever the SPUR tropical with its unique X-Frame system designed to allow maximum airflow, evaporation and climate control when in hot environments under a heavy physical workload. The X-Frame will also help distribute the pack load onto the hips and small of the back reducing strain. The frame has removable shoulder straps featuring Airmesh padding. We have also included a waist strap and Airmesh padding with a pocket to stow the waist straps when not in use.

A large 34L (2075 ci) main storage compartment provides ample storage for mission items such as radios, batteries, MOE tools or overnight/ECW gear. This compartment also features 3 zippered mesh pockets and a hydration sleeve and hanger for a 3Lbladder. Hydration and cable routing is found through two covered ports on the top of the pack.

The second compartment 8.29L (505 ci) allows for extra clothing panel markers etc. and includes a further two mesh zippered pockets for the storage of smaller items such as strobes, cyalume etc.

The front flat zippered pocket is perfect for smaller items i.e notebooks, maps, snacks, darts ect.

Around the outside of the pack you will find 4 large 3.38L (206 ci) pockets perfectly sized for issue ration packs, 1L flasks and other similar sized objects. We have left an opening behind the pockets for the storage of long items (as pictured with scope tripod).

Accessories pictured not included.

Features

• 56 litre capacity
• Weight 1.9kg
• Ventilated harness with internal frame
• 3 zippered compartments
• 4 External pockets with dual closure
• Hydration hanger and removable mesh pocket
• 3 zippered mesh pockets inside the main compartment
• 2 zippered mesh pockets inside the second compartment
• Sewn drainage holes
• 500 denier Multicam®  nylon
• 140mm x 50mm loop for IFF, patches ect.
• Milspec thread and stitching
• YKK zips with paracord pulls

Dimensions approx.

Main compartment 50cm (H) x 34cm (W) x 20cm (D)

Front large compartment 44cm (H) x 29cm (W) x 6.5cm (D)

Flat zippered pocket 27cm (H) x 28cm (W) x 2.5cm (D)

External pockets x4 24cm (H) x 12cm (W) x 11.5cm (D)

Flimmuur Tactical is proud to present an exclusive collaboration with Platatac:  Tac Dax V4 made in an accurate reproduction of a classical Tigerstripe pattern, sampled from a period artifact.

The Tac Dax V4 are a full-featured combat pant with a modern tailored fit and with an emphasis on versatility and functionality, they are made with durable, but comfortable Nylon Cotton Rip-Stop material. Featuring strategically placed Tweave 4-way stretch fabric in the crotch, knees and lower back to aid in dynamic movement and all-day comfort. The Tac Dax V4 are suitable for long-duration operations in all-round conditions and will keep you mission-ready and in the fight.

Matching CUTS V4 combat, Willard trousers and Jungle Kurtz field shirts are also available.

Free UK Postage

Features

• Made with an accurate reproduction of a classic Tigerstripe pattern
• Tweave 520E 4 way stretch material in high-stress areas
• Padded & elasticised adjustable waist for increased user comfort
• Dedicated knife pocket in hand pockets
• Internal Knee pockets for various OEM removable knee pad systems
• Adjustable knee pad height in the front pocket
• Hook and loop knee adjustment
• Elasticised adjustment tabs on the ankles
• Zippered fly with Velcro closure
• Rear pockets with Velcro closure
• Utility pockets on the front of the thigh
• Open top pockets behind front thigh pockets
• Large thigh pockets with Velcro closure
• Open top pockets behind large pockets
• Lower leg pockets with zip closure
• Dual-layer seat and cuff to reduce wear

Materials

• 50/50 NYCO (Nylon Cotton Mix) Rip-Stop
• Tweave 520E 4-way stretch fabric

Sizing